返回列表 发布新帖

[生物] 食品包装瓶用PET树脂乙醛含量测定结果的影响因素研究

7 0
admin 发表于 2025-2-5 13:00 | 查看全部 阅读模式

食品包装瓶用PET树脂乙醛含量测定结果的影响因素研究
目的  探究氮气、水分、粉碎时间、粒径对食品包装瓶用聚对苯二甲酸乙二醇酯(PET)树脂粒子中残留乙醛含量测定结果的影响。方法  根据SH/T 1817-2017《瓶用聚对苯二甲酸乙二醇酯(PET)树脂中残留乙醛含量的测定顶空气相色谱法》, 采用控制变量法, 考察氮气吹扫顶空瓶、样品含水量、粉碎时间、粒径对瓶用PET树脂粒子乙醛含量测试结果的影响。结果  经过氮气保护的测试结果高于未经氮气保护的测试结果; 含5、10、15 μL蒸馏水试样的测试结果高于干燥样品的测试结果, 且含水量越大测试结果越大; 粉碎时间对测试结果的影响不明显(P=95%); 粒径越小测试结果越大。结论  测试食品包装瓶用PET树脂粒子乙醛含量时, 样品须用氮气保护且保持干燥状态, 以获得准确的测试结果。建议SH/T 1817-2017中对于试样粒径的要求进一步细化, 以提高测试方法的统一性。

Objective  To investigate the effects of nitrogen, water, crushing time and particle diameter on determination of acetaldehyde content in polyethylene terephthalate (PET)resin used for food packaging bottles. Methods  According to SH/T 1817-2017 Plastics-Determination of residual acetaldehyde in polyethylene terephthalate (PET) resin for bottles-Headspace gas chromatography, the controlled variable method was used to investigate the effects of nitrogen purging the headspace bottle, the water content of sample, different crushing time and different particle diameter on the test results of acetaldehyde content of PET resin particles used in bottles. Results  The test results with nitrogen protection were higher than those without nitrogen protection. The test results of samples with 5, 10, 15 μL distilled water were higher than those of dry samples, and with the greater the water content, the greater the test results were. The impact of the crushing time on the test results was not obvious (P=95%).The test result became larger as the particle size became smaller. Conclusions  When testing the acetaldehyde content of PET resin particles used in food packaging bottles, the samples should be protected by nitrogen and kept dry to obtain accurate test results. It is suggested that the particle size requirement of the standard SH/T 1817-2017 should be further refined to improve the uniformity of the test method.

标题:食品包装瓶用PET树脂乙醛含量测定结果的影响因素研究
英文标题:Research on influencing factors on determination of acetaldehyde content in polyethylene terephthalate resin used for food packaging bottle

作者:
孙文文 常州进出口工业及消费品安全检测中心
何秋旻 常州进出口工业及消费品安全检测中心
董世蒙 常州进出口工业及消费品安全检测中心
王琼 常州进出口工业及消费品安全检测中心
吴文婷 常州进出口工业及消费品安全检测中心

中文关键词:聚对苯二甲酸乙二醇酯树脂,乙醛,氮气,水分,粉碎时间,粒径,
英文关键词:polyethylene terephthalate resin,acetaldehyde,nitrogen,water,crushing time,particle diameter,

发表日期:2019-12-06
2025-2-4 21:00 上传
文件大小:
545.97 KB
下载次数:
60
高速下载
【温馨提示】 您好!以下是下载说明,请您仔细阅读:
1、推荐使用360安全浏览器访问本站,选择您所需的PDF文档,点击页面下方“本地下载”按钮。
2、耐心等待两秒钟,系统将自动开始下载,本站文件均为高速下载。
3、下载完成后,请查看您浏览器的下载文件夹,找到对应的PDF文件。
4、使用PDF阅读器打开文档,开始阅读学习。
5、使用过程中遇到问题,请联系QQ客服。

本站提供的所有PDF文档、软件、资料等均为网友上传或网络收集,仅供学习和研究使用,不得用于任何商业用途。
本站尊重知识产权,若本站内容侵犯了您的权益,请及时通知我们,我们将尽快予以删除。
  • 手机访问
    微信扫一扫
  • 联系QQ客服
    QQ扫一扫
2022-2025 新资汇 - 参考资料免费下载网站 最近更新浙ICP备2024084428号
关灯 返回顶部
快速回复 返回顶部 返回列表