返回列表 发布新帖

[能源与动力工程] 非均匀翅片对级联相变储热系统热性能强化的研究

6 0
admin 发表于 2025-1-21 14:00 | 查看全部 阅读模式

非均匀翅片对级联相变储热系统热性能强化的研究
摘要:级联相变储热是一种具有重要商业前景的相变储热技术。利用数值模拟方法研究了一种采用非均匀翅片布置进行强化传热的级联相变储热系统,分析了各级相变储热模块采用均匀翅片数量和均匀翅片高度布置对系统的强化作用,进而研究了各级模块采用非均匀翅片数量和非均匀翅片高度布置下系统的充/放热性能。研究结果表明:相比于各级采用均匀翅片数量布置,采用非均匀翅片数量布置的级联相变储热系统可缩短完全熔化及凝固总时间约5.2%,同时提高系统充热平均功率约12.6%;采用非均匀翅片高度布置可略微缩短系统完全熔化及凝固总时间,但对系统充/放热平均功率影响较小。研究结果对级联相变储热系统的强化传热具有一定理论指导价值。

Abstract:The cascaded latent heat thermal energy storage (CLH-TES) is a kind of thermal energy storage technology with promising commercial prospects. The heat transfer enhancement of CLH-TES system by adding uneven number/height of fins for different phase change material (PCM) layers (uneven number/height layout) was numerically investigated. Firstly, for the system adding same number/height of fins for all the PCM layers (even number/height layout), the influences of number and height of fins on the charging and discharging performance were compared. Then, the charging and discharging performances of the systems with uneven number/height layout of fins were calculated. The results show, comparing to the even number layout,the system with uneven number layout can shorten the total time for the melting and solidification processes by 5.2% and increase the average charging rate by 12.6%. Besides, comparing to the even height layout, the system with uneven height layout can slightly decrease the total time for the melting and solidification processes but hardly affect the average charging and discharging rate. The findings can guidance the design of heat transfer enhancement to the CLH-TES with fins.

标题:非均匀翅片对级联相变储热系统热性能强化的研究
title:Heat Transfer Enhancement of a Cascaded Latent Heat Thermal Energy Storage System by Fins With Different Uneven Layouts

作者:廖志荣, 李朋达, 田紫芊, 徐超, 魏高升
authors:Zhirong LIAO, Pengda LI, Ziqian TIAN, Chao XU, Gaosheng WEI

关键词:太阳能热发电,级联相变储热(CLH-TES),相变材料(PCM),强化传热,非均匀翅片,数值模拟,
keywords:solar thermal power generation,cascaded latent heat thermal energy storage (CLH-TES),phase change material (PCM),heat transfer enhancement,uneven fins,numerical simulation,

发表日期:2022-02-28
2025-1-21 00:23 上传
文件大小:
1.48 MB
下载次数:
60
高速下载
【温馨提示】 您好!以下是下载说明,请您仔细阅读:
1、推荐使用360安全浏览器访问本站,选择您所需的PDF文档,点击页面下方“本地下载”按钮。
2、耐心等待两秒钟,系统将自动开始下载,本站文件均为高速下载。
3、下载完成后,请查看您浏览器的下载文件夹,找到对应的PDF文件。
4、使用PDF阅读器打开文档,开始阅读学习。
5、使用过程中遇到问题,请联系QQ客服。

本站提供的所有PDF文档、软件、资料等均为网友上传或网络收集,仅供学习和研究使用,不得用于任何商业用途。
本站尊重知识产权,若本站内容侵犯了您的权益,请及时通知我们,我们将尽快予以删除。
  • 手机访问
    微信扫一扫
  • 联系QQ客服
    QQ扫一扫
2022-2025 新资汇 - 参考资料免费下载网站 最近更新浙ICP备2024084428号
关灯 返回顶部
快速回复 返回顶部 返回列表