工程勘察数据的传递控制与可视化
摘要:从广义说,工程勘察成果中的很大一部分是通过大量数据的传递与处理取得的。数据传递结构的优化和合理控制是提高勘察效率和质量的保证。讨论了用程序编制的方法实现的数据从平面图到剖面图的钻孔距离传递,利用模糊聚类思想提出的对剖面数据进行合并的建议和利用地质三维软件实现的三维地质体模型的耦合展示,这几个问题正是目前大多勘察单位在数据控制与传递流程中可能欠缺的环节。
Abstract:In broad sense, it is believed that a large part of outcome of geotechnical investigation is achieved through the transmission and processing of the massive data. And the improving on the efficiency and quality can be ensured by the optimization of data transfer structure and the reasonable control. It is discussed that how the data of borehole distances being transmitted from an ichnographic layout to the section planes employing a computer program, and a method of merging analogy soil sub-layers to a major layer with the same statistical properties to facilitate the mechanical analysis using the fuzzy clustering is introduced. Finally a 3D geological model is coupling displayed with a three-dimensional geological software. The forenamed issues may just be limitations of present practice in data control and transfer process in most geotechnical engineering investigation organizations.
中文标题：
工程勘察数据的传递控制与可视化
Transfer Control and Visualization of Geotechnical Engineering Investigation Data
作者：
张鹏1,2,张在明1,2,杨宇友1
Zhang Peng1,2,Zhang Zaiming1,2,Yang Yuyou1
作者简介:张鹏,1982年生,男,汉族,河北邯郸人,硕士研究生。E-mail:zhangpeng0217@126.com
通讯地址：
1. 北京工业大学建筑工程学院, 北京 100022; 2. 北京市勘察设计研究院有限公司, 北京 100038
1.CollegeofArchitectureandCivilEngineering,BeijingUniversityofTechnology,Beijing100022; 2.BGIEngineeringConsultantsLtd.,Beijing100038China
中图分类号:TU191
出版物：岩土工程技术
收稿日期:2007-12-28
网络出版日期:2021-07-07
关键词:工程勘察,数据处理,三维可视化
Key words:geotechnical engineering investigation,data processing,3D visualization
文档包含图片数量：图片(0)张
文档包含表格数量：表格(0)个
参考文献：
基金项目：
基金项目: 教育部博士点基金项目(20060005012) 北京市自然科学基金重点项目(KZ200710005004)
- 文件大小:
- 831.07 KB
- 下载次数:
- 60
-
高速下载
|
|
