土体抗剪强度参数的钻孔剪切试验方法初探
摘要:介绍了一种通过钻孔剪切试验测定土体抗剪强度参数的原位测试新方法,从试验原理、试验设备和试验数据处理分析方法等方面对钻孔剪切试验进行了总结。为验证钻孔剪切试验的工程适用性,采用美国Iowa钻孔剪切试验仪分别对非饱和黄土及饱和黄土的抗剪强度指标进行了实测。试验结果表明,钻孔剪切试验可快速、直接地得到黄土的抗剪强度参数,试验数据的线性相关性较高。针对现有钻孔剪切试验中存在的问题,建议了今后的研究方向。
Abstract:The Borehole Shear Test(BST) was introduced as a new in-situ method for determining shear strength parameters of soils.The borehole shear tests are summarized,including the shearing mechanism,test equipment and test data processing method etc.To evaluate the engineering applicability of the test,the Iowa borehole shear tester are adopted to determine shear strength parameters of unsaturated loess and saturated loess in geotechnical investigation.The test results show that,the BST is a rapid and direct method of measuring the in,situ shear strength of loess,and gains a good linear relativity between normal stress and shear stress.Then in view of existence question in BST,the recommendations for future research are also proposed.
中文标题:
土体抗剪强度参数的钻孔剪切试验方法初探
Study on Borehole Shear Test for Soil Shear Strength Parameter Testing
作者:
于永堂1,2,3,高远1
YU Yong-tang1,2,3,GAO Yuan1
作者简介:于永堂,1983年生,男,满族,辽宁鞍山人,博士研究生,工程师。主要研究方向:湿陷性黄土地基处理技术,土工测试技术。E-mail:yuyongtang@126.com
通讯地址:
1. 西安建筑科技大学土木工程学院, 陕西西安 710055; 2. 机械工业勘察设计研究院有限公司, 陕西西安 710043; 3. 陕西省特殊土工程性质与处理技术重点实验室, 陕西西安 710043
1.Collegeofcivilengineering,Xi'anUniversityofArchitectureandTechnology,Xi'an710055,ShaanxiChina; 2.ChinaJKInstituteofEngineeringInvestigationandDesignCo.,Ltd,Xi'an710043,Shaanxi,China; 3.ShaanxiKeyLaboratoryofEngineeringBehaviorandFoundationTreatmentforSpecialSou,Xi'an710043,Shaanxi,China
中图分类号:TU411
doi:10.3969/j.issn.1007-2993.2015.04.002
出版物:岩土工程技术
收稿日期:2015-04-09
网络出版日期:2021-07-19
关键词:钻孔剪切试验,原位测试,黄土,抗剪强度指标
Key words:Borehole Shear Test,in-situ test,loess,shear strength parameter
文档包含图片数量:图片(0)张
文档包含表格数量:表格(0)个
参考文献:
基金项目:
基金项目: 国家科技支撑计划项目(NO.2013BAJ06B01)
- 文件大小:
- 1.05 MB
- 下载次数:
- 60
-
高速下载
|
|