装配式生态挡墙结构承载特性研究
摘要:针对传统柱板墙的排水性能差、可绿化性差、预制化程度低等缺点，将传统柱板墙实心立柱改造成中空结构并对其进行分段，各部件通过螺栓连接；将其挡土板进行改进，得到一种百叶窗形的挡土板。为确定其适用性、安全性，首先对其进行足尺破坏性试验，再利用ABAQUS有限元软件，对此类挡墙进行三维数值模拟。得到以下结论：当荷载达到202.5 kN时，对立柱柱底取矩，即当弯矩达到337.50 kN·m时，达到正常使用极限状态，当荷载达到335 kN，对立柱柱底取矩，即弯矩达到558.33 kN·m时，达到极限承载状态；该类挡墙在用于路肩墙与路堤墙工况下具有差异性，表现为用于路堤墙时为开口的胀肚形多段“U”形曲线，而用于路肩墙时为闭口的胀肚形多段“U”形曲线；随着车辆荷载距离的增加，挡墙结构受力减小速率先增大后减小。
Abstract:Aiming at the disadvantages of traditional column slab wall, such as poor drainage performance, poor greening ability and low degree of prefabrication, the column of column slab wall is segmented and hollowed out, and the components are connected by bolts. By improving the retaining plate, a shutter shaped retaining plate is obtained. In order to determine its applicability and safety, the full scale destructive test is carried out firstly, and then the three-dimensional numerical simulation of this kind of retaining wall is carried out by using ABAQUS finite element software. The following conclusions are obtained: when the load reaches 202.5 kN, the moment at the bottom of the column, that is, when the bending moment reaches 337.50 kN·m, it reaches the limit state of normal use; when the load reaches 335 kN, take the moment at the bottom of the column, that is, when the bending moment reaches 558.33 kN·m, it reaches the limit state. This kind of retaining wall is different when it is used for the shoulder wall and the embankment wall, which shows that when it is used for the embankment wall, it is an open bulging "U" curve, while when it is used for the shoulder wall, it is a closed bulging "U" curve. With the increase of vehicle load distance, the force reduction rate of retaining wall structure first increases and then decreases.
中文标题：
装配式生态挡墙结构承载特性研究
Load Bearing Characteristics of Prefabricated Ecological Retaining Wall
作者：
白丽辉,朱聪,黄天元,杨昕源,涂杰文
Bai Lihui,Zhu Cong,Huang Tianyuan,Yang Xinyuan,Tu Jiewen
作者简介:白丽辉，女，1974年生，满族，辽宁岫岩人，大学本科，高级工程师。研究方向：公路桥梁施工与预制拼装技术。E-mail：702283561@qq.com
通讯地址：
浙江交工集团股份有限公司，浙江杭州 310006
ZhejiangJiaogongGroupCo.,Ltd.,Hangzhou310006,Zhejiang,China
中图分类号:TU 476；U 417
doi:10.3969/j.issn.1007-2993.2022.05.001
出版物：岩土工程技术
收稿日期:2021-06-23
网络出版日期:2022-10-08
刊出日期:2022-10-08
关键词:装配式生态挡墙,薄壁立柱,斜插板,足尺试验,数值模拟
Key words:prefabricated ecological retaining wall,thin wall column,inclined inserting plate,full scale test,numerical simulation
文档包含图片数量：图片(11)张
文档包含表格数量：表格(2)个
参考文献：
[1]蒋梅东. 装配式挡土墙结构设计与试验研究[D]. 湘潭: 湖南科技大学, 2017.
[2]刘 泽,何 矾,黄天棋,等. 装配悬臂式挡土墙节点承载特性试验研究[J]. 公路交通科技,2020,37(9):25-33. doi: 10.3969/j.issn.1002-0268.2020.09.004
[3]韩晓云. 路堤边坡绿化装配式挡土墙的稳定性分析[D]. 成都: 西南交通大学, 2019.
[4]屈俊童,段自侠,雷 真,等. 土拱效应下的挂板式斜插桩板墙模型试验研究[J]. 地下空间与工程学报,2020,16(2):420-430.
[5]中交第二公路勘察设计研究院有限公司. 公路挡土墙设计与施工技术细则[M]. 北京: 人民交通出版社, 2008.
[6]聂建国,王宇航. ABAQUS中混凝土本构模型用于模拟结构静力行为的比较研究[J]. 工程力学,2013,30(4):59-67,82.
[7]LUBLINER J,OLIVER J,OLLER S,et al. A plastic-damage model for concrete[J]. International Journal of Solids and Structures,1989,25(3):299-326. doi: 10.1016/0020-7683(89)90050-4
[8]LEE J,FENVES G L. Plastic-damage model for cyclic loading of concrete structures[J]. Journal of Engineering Mechanics Division-ASCE,1998,124(8):892-900. doi: 10.1061/(ASCE)0733-9399(1998)124:8(892)
[9]BELARBI A,HSU T T C. Constitutive laws of softened concrete in biaxial tension-compression[J]. ACI Structural Journal,1995,92(5):562-573.
[10]MOHAMAD M,LEE J Y,HSU T T C. Cyclic stress-strain curves of concrete and steel bars in membrane elements[J]. Journal of Structural Engineering,2021,127(12):1402-1411.
[11]阮宜东. 宕渣土填筑性能的试验研究与仿真优化设计[D]. 合肥: 合肥工业大学, 2012.
[12]詹炳根,叶晓华,韩 丁,等. 宕渣土桥背回填冲击累积变形研究[J]. 合肥工业大学学报(自然科学版),2013,(11):1347-1351.
[13]王力威,茅一帆,孙康乐. 灰土比和龄期对灰土抗剪性能影响的试验研究[J]. 科技通报,2016,32(11):89-93,114. doi: 10.3969/j.issn.1001-7119.2016.11.018
[14]王 珊. 边坡工程设计施工新技术与质量检测验收实务全书[M]. 北京: 北京北影出版社, 2012.
基金项目：
基金项目:浙江省交通运输厅科技计划项目“公路装配式可绿化挡墙工业化技术研发与应用（2019007）”
- 文件大小:
- 4.93 MB
- 下载次数:
- 60
-
高速下载
|
|
